DIY Telegram BOT untuk CUBE AC Relay Board

Kalau sebelumnya saya pernah membahas mengenai menginstall Telegram desktop di linux, serta cara membuat botnya. Kali ini saya akan berbagi Cara membuat koding untuk ESP8266 agar dapat diakses via telegram. 

Sebelum membahas kodingnya pastikan dahulu Arduino IDE telah terinstall library CTBot via library manager. Setelah itu baru buat koding seperti Berikut ini :

Silahkan anda mengganti nama SSID sesuai nama Router anda, dan password yang sesuai, serta token  yang didapat saat anda membuat BOT

 #include <ESP8266WiFi.h>  
 #include "CTBot.h"  
 CTBot tele;  
 String ssid = "mySSID"  ; // REPLACE mySSID WITH YOUR WIFI SSID  
 String pass = "myPassword"; // REPLACE myPassword YOUR WIFI PASSWORD, IF ANY  
 String token = "myToken"  ;  
 String reply;  
 void setup() {  
  pinMode(LED_BUILTIN,OUTPUT);  
  Serial.begin(115200);   
  tele.wifiConnect(ssid, pass);  
  tele.setTelegramToken(token);  
  Serial.println("");  
  Serial.println("Status : Device Connected to Network");  
  Serial.print("Status : Connected to : ");  
  Serial.println(WiFi.SSID());  
  IPAddress ip = WiFi.localIP();  
  Serial.print("Status : Local IP address : ");  
  Serial.println(ip);  
  if(tele.testConnection()){  
    Serial.println("Status : Connected to Telegram");  
  }else{  
    Serial.println("Status : Not Connected to Telegram");  
  }  
 }  
 void loop() {  
  TBMessage msg;  
  // if there is an incoming message...  
  if (tele.getNewMessage(msg)){  
   if (msg.text.equalsIgnoreCase("/start")) {  
    reply="Selamat datang mas";  
    tele.sendMessage(msg.sender.id, reply);  
   }  
   if (msg.text.equalsIgnoreCase("/menu")) {  
   reply = "Menu : 1.Tolong nyalain lampu dong 2.Tolong matiin lampu dong 3.Nyala 4.Mati";  
   tele.sendMessage(msg.sender.id, reply);       // and send it  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   }  
   if (msg.text.equalsIgnoreCase("lagi ngapain?")) {  
   reply = "lagi beres beres mas";  
   tele.sendMessage(msg.sender.id, reply);  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   reply = "ada apa ya mas?";  
   tele.sendMessage(msg.sender.id, reply);  
   }  
   if (msg.text.equalsIgnoreCase("ngga papa")) {  
   reply = "ooo..,kirain ada apa";  
   tele.sendMessage(msg.sender.id, reply);  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   }  
   if (msg.text.equalsIgnoreCase("udah makan belum?")) {  
   reply = "udah mas, si mas juga dah makan?";  
   tele.sendMessage(msg.sender.id, reply);  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   }  
   if (msg.text.equalsIgnoreCase("belum")) {  
   reply = "mbok makan dulu mas nanti laper loh";  
   tele.sendMessage(msg.sender.id, reply);  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   }  
   if (msg.text.equalsIgnoreCase("sudah")) {  
   reply = "yo wis, tak lanjut kerja dulu ya mas";  
   tele.sendMessage(msg.sender.id, reply);  
   //telegram.sendMessage(msg.sender.id, msg.text);  
   }  
   if (msg.text.equalsIgnoreCase("tolong nyalain lampu dong")) {       // if the received message is "LIGHT ON"...  
    digitalWrite(LED_BUILTIN, LOW);                // turn on the LED (inverted logic!)  
    tele.sendMessage(msg.sender.id, "sudah mas, lampunya sudah dinyalain"); // notify the sender  
    Serial.println("Status : ON request from Telegram");  
   }  
   else if (msg.text.equalsIgnoreCase("tolong matiin lampu dong")) {    // if the received message is "LIGHT OFF"...  
    digitalWrite(LED_BUILTIN, HIGH);               // turn off the led (inverted logic!)  
    tele.sendMessage(msg.sender.id, "sudah mas, lampunya sudah dimatiin"); // notify the sender  
    Serial.println("Status : OFF request From Telegram");  
   }  
   if (msg.text.equalsIgnoreCase("nyala")) {       // if the received message is "LIGHT ON"...  
    digitalWrite(LED_BUILTIN, LOW);                // turn on the LED (inverted logic!)  
    tele.sendMessage(msg.sender.id, "sudah mas, lampunya sudah dinyalain"); // notify the sender  
    Serial.println("Status : ON request from Telegram");  
   }  
   else if (msg.text.equalsIgnoreCase("mati")) {    // if the received message is "LIGHT OFF"...  
    digitalWrite(LED_BUILTIN, HIGH);               // turn off the led (inverted logic!)  
    tele.sendMessage(msg.sender.id, "sudah mas, lampunya sudah dimatiin"); // notify the sender  
    Serial.println("Status : OFF request From Telegram");  
   }  
  }  
 }  

Coding ini dibuat untuk CUBE AC relay board, namun bisa anda modifikasi sesuai dengan board yang anda pergunakan.


Semoga Bermanfaat.